Quote from issuebristle on June 25, 2023, 5:19 pm

Hi all,

Got my setup secondhand and upgraded the firmware to the latest. My IAC steps are <10 (~7). I have loaded the default V8 configuration for my AMC V8. I'm running cam selection 3 for ~11 vacuum.

My AFR trim / learn seems to be pretty acceptable (around -10-15%). My idle is great, but anytime I give the engine sudden throttle - I get a slight bog, then popping out of the throttle body. I can rev the engine slowly and avoid this, but mashing on the gas any amount beyond "slow" just doesn't work out.

I have adjusted the Accel Pump down -50% as well as fast accel down the same with no change in behavior. Any other settings I should be looking at?

I can post a log as soon as I figure out how to get the files to stop saving without any contents if it helps, just looking for guidance on where to start.