70051 Injector harness
Hey Guys/Gals,
New to the group and thanks for the add. So I am very new to the ls world. I am putting a LM7 5.3 with a truck intake into my 74 Olds Omega I bought the Fitech 70051 with trans control however I am running the truck intake and both the injector harness's are wrong I am presuming they are for a car style intake. I want to say I am running denso style injectors??? I think bluestreak/standard # is fj315 for the injector but have to pull a number off one of my injectors yet. Anyone have any ideas as Fitech has not responded to me yet. Any help would be appreciated. Thanks.
I moved your post to the LS section.
When you say the harness is wrong... are the plugs wrong or does it not lay out correct?
The layout is good just the connectors/pig tails for the injectors are wrong.
Hey Guys,
Here is some pics the layout of the harness is fine just the wrong ends to what I need. best pic I could get of my injector.
Uploaded files:- You need to login to have access to uploads.
Anybody have any ideas? FiTech tech department never did respond to me 🙁
I am very new to the LS world so learning as I go! As you can see the 2 harness's that come with the 70051 have the wrong ends on them and will not fit my injectors.
This will need to be handles between yourself and Fitech. See if you can reach Dominic. He seems to be the best with the LS systems.
I have got you a solution. You need an adaptor something like this.
Uploaded files:
- You need to login to have access to uploads.
Yes probably adapter like that would work but wonder if I should get ahold of Dominic @ FiTech anyone have a direct email for him? It would be my best way to contact him.
Thanks guys 🙂
No need in reaching out to Dominic. I got the adapter suggestion from a friend at Fitech.