Cranking fuel question (procal)
under the Cranking Fuel table in procal, the Prime Fuel Mult will not allow me to input anything bellow 30. I've seen it on another cal that it is set at 0, but, if say I change it to 35 and then try to set it back to 0 it will not do it either (so I don't think it's related to the files themselves)
How do I make it go to 0? is there some other tables that need to be set? (I have big spark and big AFR enabled)
Have you tried to make the adjustment in the handheld unit? Send to ECU. Turn off the key for :30 secs. Turn key back on, then check the setting again on the handheld? I have seen as I make changes and send to ECU, you don't always get them to sink in. Not sure if this helps at all...I'm still a new to FiTech software but I'm an old HP Tuners guy so I am brushing off my "skill set".