Default Injector Flow Rate not Matching Actual Flow
I have a 1200 power adder and have noticed in both the original calibration and the 198i calibration the injector flow rate listed in the default v8 configuration does not match the 80lb injector flow rate of the actual injectors. In my original one it was something like 55 lb and in the latest version it’s 30 something lb. Is there a reason for this? Should I update the setting to 80?
That is a good question. I remember something coming up like this before. It had to do with different units of measurement. I will need to send an Email on this one and see what Bryce says...
Ok, let me know what he says. Thanks!
The DEFAULT V8 cal file is set to 74.2 on the injector flow rate. You can change the value to 80 lbs. FYI this is off the of the PRO TUNING Software which can be installed from the handheld by plugging it into a computer.