Please insert TF card?
Hey guys,
I have a GO EFI 30008 that has been running well for a few months. My water pump started leaking after only a few hundred miles on the new engine so I changed that out. I went to start the car today to test and make sure there were no leaks. Normally the car fires right up. I tried several times and gave it gas but couldn't get it to run. I let it sit a minute and tried it again and it started immediately. While I was sitting there I turned on the handheld to monitor the water temp against my dash gauge. When I went to the dashboard I got "Load Failed Please Insert TF card". Nothing is working on the handheld. In the menu its either "Missing the Group" or says "Insert TF card". What do I need to do to get this resolved? Sounds like somehow it lost all the files and I will have to start over or is there an issue with the handheld. Hopefully someone can point me in the right direction to get this going again.
I tried unhooking both cables from the handheld and plugged back in and all is working now. It kept all my settings. I am going to back up the file just in case I ever lose it again.