Forum Navigation
Throttle spring tension
#1 · April 25, 2019, 7:29 pm
Is there a way to releave some of the throttle spring tension on these ? I’ve busted the factory cable and pulled this one apart twice . Is there a reason they’ve made these spring with such a hard pull? And no there not binding anywhere and geometry seems correct. Thanks for any info
Uploaded files:- You need to login to have access to uploads.
#2 · April 26, 2019, 5:49 am
At your own risk. This is a common complaint with the 2x4 setup. I have seen guys take a full turn out of the spring tension. Never done it myself. But I hear it works....
Must disassemble the linkage to accomplish.
JPrice618 and Lance have reacted to this post.
JPrice618Lance
#3 · April 26, 2019, 9:24 pm
Worked like a charm, took one turn out of front primary , left rear alone and way less pull on cable, Thanks , Greatly appriciated.
Deleted user and Lance have reacted to this post.
Deleted userLance
#4 · November 24, 2019, 7:13 pm
Can you describe how you did this?
65 GTO with built 406 Chevy smallblock, Fitech