Ultimate LS Systems 700xx information
@paul-bell I decided to give the 2 fan 3 relay a shot. Here is what Ive got so far. I dont have the power wires hooked up yet, they will be 10 gauge with 30 amp fuses straight from the battery. In your writeup you mention "Each fused feed should support one fan's startup and run current. Use wiring for 30 amps and relays rated at 40 amps." Is that just for the power wires and the wires coming from the fans? Obviously the "Fan 1" and "Fan 2" control wires coming from the ECU are smaller so Ive jumpered the relays with same size wiring. Ive also tapped and used the same size wire as the "key" red wire from the ECU for the "ignition hot" from your schematic, will this work?
edit: Also dont mind the relays, 2 of them are incorrect and will be swapped out when I get the correct ones.
Uploaded files:- You need to login to have access to uploads.