Forum Navigation
Ultra Ram - Timing Control - No Start
#1 · June 12, 2025, 2:52 pm
So, I have the Ultra Ram wiring with an 8 stack on a small block ford, MSD 6AL, Blaster Coil, MSD pro billet distributor. (All new intake, injectors, MSD parts, etc.)
Distributor is locked out and set at 10 btdc. It will start and idle fine when using the MSD for timing. It will not start at all when using the white wire from the FiTech to the MSD. I get almost no spark when using the Fitech. Fitech is telling me to check the signal on the white wire or to replace the coil. I can't see the coil being an issue since it runs fine when using the MSD..
Thoughts?