AFR tables for Boost missing?
Hi, I have a 70050 set up on a LY6 with a LSA blower. Fires right up and idles good, so no issues there. My problem is that I only have AFR targets for 40-70-95kpa No higher values. I have seen that it should have a 180kpa setting but I cannot find anything that will change the target setpoints. Do I need a software update maybe? The system was bought about a year ago, but has been sitting until now before I got around to installing it. Any help would be appreciated.
I have not been provided any Software Updates for the LS systems. I will do a little research. See if we can come up with a solution.
I would really appreciate it. As far as I can understand I should have 45-95-180 KPA target points and not 40-75-95 KPA target points. I have played a little with the breakpoints but it does not seem to make any difference. I am not comfortable to take this engine into boost with what I have now... I have set it at 11.5:1 at 95KPA for now but I feel it is too rich so I would like to keep it at 12.8:1 or so at 95KPA and then have 11.5:1 at 180 KPA. Maybe my unit was shipped out with a wrong firmware file?
Quote from Roar J on April 1, 2019, 7:28 amHi, I have a 70050 set up on a LY6 with a LSA blower. Fires right up and idles good, so no issues there. My problem is that I only have AFR targets for 40-70-95kpa No higher values. I have seen that it should have a 180kpa setting but I cannot find anything that will change the target setpoints. Do I need a software update maybe? The system was bought about a year ago, but has been sitting until now before I got around to installing it. Any help would be appreciated.
I have been given a Software Update for boosted applications on the Ultimate LS. Email me at Austin@fitechefituning.com to receive the Software. Install instructions are in the Members Section in the Software Update topic.
what is the last spftware version ???? i have 1.2.5 software version
Quote from Austin DeHaas on April 1, 2019, 10:39 amQuote from Roar J on April 1, 2019, 7:28 amHi, I have a 70050 set up on a LY6 with a LSA blower. Fires right up and idles good, so no issues there. My problem is that I only have AFR targets for 40-70-95kpa No higher values. I have seen that it should have a 180kpa setting but I cannot find anything that will change the target setpoints. Do I need a software update maybe? The system was bought about a year ago, but has been sitting until now before I got around to installing it. Any help would be appreciated.
I have been given a Software Update for boosted applications on the Ultimate LS. Email me at Austin@fitechefituning.com to receive the Software. Install instructions are in the Members Section in the Software Update topic.
Austin,
Was this update done this month?
Quote from TheStig86 on April 30, 2019, 10:49 pmQuote from Austin DeHaas on April 1, 2019, 10:39 amQuote from Roar J on April 1, 2019, 7:28 amHi, I have a 70050 set up on a LY6 with a LSA blower. Fires right up and idles good, so no issues there. My problem is that I only have AFR targets for 40-70-95kpa No higher values. I have seen that it should have a 180kpa setting but I cannot find anything that will change the target setpoints. Do I need a software update maybe? The system was bought about a year ago, but has been sitting until now before I got around to installing it. Any help would be appreciated.
I have been given a Software Update for boosted applications on the Ultimate LS. Email me at Austin@fitechefituning.com to receive the Software. Install instructions are in the Members Section in the Software Update topic.
Austin,
Was this update done this month?
Not sure. Why do you ask?
Quote from Roar J on April 1, 2019, 7:28 amHi, I have a 70050 set up on a LY6 with a LSA blower. Fires right up and idles good, so no issues there. My problem is that I only have AFR targets for 40-70-95kpa No higher values. I have seen that it should have a 180kpa setting but I cannot find anything that will change the target setpoints. Do I need a software update maybe? The system was bought about a year ago, but has been sitting until now before I got around to installing it. Any help would be appreciated.
Don't know offhand where you change it in the handheld but the image i have is in the procal software. Wait I know where it is Main Menu/#6 Fitech Pro Tuning/#15 BreakPoints/
Wait assuming you have went Main Menu/Display Setup/Pro Calibration/Show first
Uploaded files:- You need to login to have access to uploads.
Im in need of the boost update if any one here can help me its hard to watch videos on how to set boost settings when my handheld doesnt have anything like what the videos show i have the ultimate ls 70001 kit