Here is a video of mine. This was literally the 3rd start attempt after plugging in the initial data to the handheld.

https://www.youtube.com/watch?v=u-obVQVSggE

Very neat install, with no timing or fan contol. The less I have to rely on the ECU, the better in my opinion.
Using intank Aeromotive 340 Stealth Pump with 30 and 10 micron filters.
Runs into a Holley 12-879 reg, as I have blocked off the return port on throttle body.
Starts first go cold or hot start.
Running ICE ignition from Australia with NGK BPR6FS plugs to assist with any noise issues.
Never had any problem with RF Noise.
400hp Cleveland with Pacemaker Extractors(headers) 4into1 into 3in pipe with Flowmaster Muffler.
Run Mustang T5 box with 3.23 LSD Disc rear.
Phase 6 Dick Johnson kit that is normally reserved for sedans, but I have modified to suit Ute.
Speedhut dash with AeroTech seats.

• You need to login to have access to uploads.