Forum Navigation
crank no start
#1 · April 4, 2020, 5:04 pm
had this system sitting in the box for two years,finally got around to getting car running(virus scare lol).....keep getting p0335 code,never get spark or a sputter etc.,tried unplugging cam,have a good signal on labscope on pin 10(?)blue wire at pcm,verified 58x tooth etc, i have 12v on reference and signal....has anyone ran into this?
#2 · April 4, 2020, 10:02 pm
You need to make sure the ECM is set to what crank sensor you have.
Also, after every setting change you make, you need to hit "save to ECM". Every single change.
#3 · April 5, 2020, 10:21 pm
from best i can tell aall settings are corresct.....used a friends pcm and handhels for a 6.0l and it fired right up