Data logging?
Issues: Difficulty starting, can not reduce IAC steps to less than 30, rough running, stalls, cranks will-not-start condition when reaching operating temps. I tried data logging when cold and later when warm to share with forum.
Opening FiTech on PC w/Windows 7 showed the following, with no datalog file to be found?
I was able to read the very poorly written instructions that mention the importance of non-interference with ignition and I do have the MSD 6AL2 and Blaster coil mounted inside in proximity with the wiring, so that will be dealt with just in case.
Appreciate any and all input on this Pontiac 455 E85 application.
Uploaded files:- You need to login to have access to uploads.
I am seeing this more and more, no Log File folder. Not sure why, but have been successful having members update their Software. Read the instructions on how to request software in the Members Section.
New software loaded. Raised idling RPM to 850. Ignition wire routed away from other wires...
Starts easily, overall better running, IAC steps down below 10 where they need to be, but still has cranks-but-will-not-start condition when engine reaches operating temperature.
Have data logging files for your consideration. How to post data logging files here? CSV files do not take.
Add datalog to your Dropbox account. Select 3 dots next to file name. Select share, then create link. Copy to Clipboard, then paste the link in your next post.
https://www.dropbox.com/s/hpz9d3zgun7ak22/DashBoard1.csv?dl=0
https://www.dropbox.com/s/ly94sj4v0uiwrds/DashBoard2.csv?dl=0
https://www.dropbox.com/s/ibhuefo1g4jmpu5/DashBoard3.csv?dl=0
Not sure what length of time to shoot for, so just tried a few different variations while driving.
Looking pretty good. May need some Accel adjustment, but wait. Let it learn a little.