Quote from
SSJohn on May 27, 2019, 3:55 pm
Hi all,
thought I’d throw this out there, may save someone some time
Looking at my logs I was getting an intermittent fault code 53.
Started to take it out and the pass side screw was finger tight. Drivers side not much better. Took it out and cleaned off the carbon, re fitted with a little oil on the o ring, tightened it back up.
After running another log, no more fault code.
John
Hi all,
thought I’d throw this out there, may save someone some time
Looking at my logs I was getting an intermittent fault code 53.
Started to take it out and the pass side screw was finger tight. Drivers side not much better. Took it out and cleaned off the carbon, re fitted with a little oil on the o ring, tightened it back up.
After running another log, no more fault code.
John
Deleted user has reacted to this post.
1970 Chevelle SS
467 built by Mark Jones, VortechPro
Muncie M22Z built by Paul Cangialosi, 5speeds
Moser 12 bolt 3.08
All Umi suspension