FiTech EFI Tuning Forum

Forum breadcrumbs - You are here:ForumGeneral Tuning: Tuning issuesFault codes
Please or Register to create posts and topics.

Fault codes

Hi guys

Need some advice on fault codes I have a 1200pa running my fuel and Fan 1 only, it was running lumpy this morning so had a look at the faults codes and see this, advice please.

Uploaded files:
  • You need to login to have access to uploads.

Anyone have an idea as to what the P0080 code is, not been able to find anything about it

Fault codes listed in the Members Section.

Nevermind, that code not on the list.  Try crossing with GM codes.  They are similar.

Did have a look first but as you say they were not list, since then I have taken the earth wires from behind the front plate and now connected them to the chassis via the unit mounting point and disabled the Fan 2, the first three now read P000 but #4 now reads 0047

 

GM shows 47 as an "air condition clutch and cruise circuit" and "Turbo/Super Charger Boost Control Solenoid Circuit Low" on another site, I don't have either ?  Found this out there, maybe of help as they are supposed to be industry standard, on the right hand side there is a full listing of 0-P0700 codes..  https://www.outilsobdfacile.com/data-trouble-code-obd2.php?dtc=p0000-p0299