Handheld controller problem
I installed my Go efi 400 system this week on my 302 engine, It started the first time.
After the engine was running I could go thru all screen and enter them. After I turned my engine off and restarted the engine i was not able to enter the dashboard or any other screen. The screen displays then "could not find group check TF card". I discovered when i cycle the compleet power of the handheld controller i was able to go thru the different screens, but after turning the engine off and restart same screen pops up. I cleaned the contacts of the TF card and reinsert it several times withoud any succes. So today I called Fitech and the came with same solution by cleaning the contacts. Before I send my controller back to Fitech i want to know if somebody had the same problems and may have a solution for it?
Uploaded files:
- You need to login to have access to uploads.
Haven't seen that, but it sounds like it would be the right answer to send handheld back.
Today i received the new handheld controller from fitech. I tested it and it works fine so it was my handheld controller.
So if somebody has the same problem this seems the solution.
Now see if i can get the the system adjusted. for now it has problems with starting when the engine is warm. But about this topic I can find a lot of information on the forum and websites.
I’m going through the same deal right now...
im having same problem couldnt find group check tf card i have two set ups i just brought one for my ls engine also one carb 1200 hp set up but my ls one says that ive tried changing controller and putting memory card in my other controller but still the same so now got someone to down load new ls soft wear onto a new card and trying that but doesnt work either so pluged lap top in and it wont show up and settings. it does run and idle but cant tune cheers mike
Hey folks, I've been running the FiTech LS system in the Arizona heat for almost a year now and just experienced this "TF card" issue. It's the first issue I've experienced that I'd blame on the FiTech system and not user error.
Ultimately I had to call FiTech (30 minute hold around 2pm PST) to have them e-mail me the required files for the FiTech LS system. I then placed those files on a new SD card and my troubles were gone. I'll let y'all know if this happens again... I'm definitely making a backup SD to keep in my truck.