Just ran FiTech for first time

#1 · July 30, 2019, 3:08 pm

I only have a few miles on my FiTech and it seems to get better as I drive it. But I do see on the handheld a fairly rich condition at both idle and cruising. How do I go about looking at the data on the handheld to determine what's going on?

Thanks!

OM22

#2 · August 4, 2019, 5:48 pm

Om22 you can log your data and look at exactly what everything is doing.

If you need to know how to log just look around there are several articles on how to log your data and how to view it.

#3 · August 22, 2019, 10:54 am

Hey Thanks!!!

Well my FiTech ran well, albeit a bit lean, so wanted to data log. Before I started a log, everything went haywire and it runs like crap. So I ran a data log while in park in my driveway because... I don't have confidence that I won't break down on the road at this point. I don't see any FiTech adjustments int he data log and battery voltage looks a little low. Thoughts?

Uploaded files:

You need to login to have access to uploads.

#4 · August 22, 2019, 11:35 am

And now I think I can use dropbox....

https://www.dropbox.com/scl/fi/vq5uibw5s1iefildgyw7c/FiTech082219.xls?dl=0&oref=wn&r=AA8LlZSiZ4bOxvs1HHtR7Rf1BoBfkSNxhwrG_BYZy4NsJPgWK2h5VQBBKCtVCjVtmfSyrSKpJjqfJeXS4F-I-QM3F6Xn-maaFzJB218LssZ9ogWigMPi_qXudnzkPf949uyd2u6Kohkf9u4_4x2HwgtdTmvrSDUheNxjJo-wjbny29uXaubWbhCQNLidGAx_ui0&sm=1

#5 · August 26, 2019, 5:39 pm

OK - so I refreshed the ecu after talking with FiTech, and ran my 67 Bronco. I attached the catalog and looking for input. Weird thing I can see is that is says almost no vacuum (boost/vacuum). Bit when I attach a vacuum gauge, I get 18"...

Thanks

Omar

https://www.dropbox.com/sh/dn2jdiuok55ov3e/AACGDQW8170VERUw-VGRZid9a?dl=0

#6 · February 29, 2020, 4:37 pm

If vacuum at 10.4 check 2 of my posts on this. might be a pinched vacuum sensor seal/grommet. Loosen ecu screws and see if vacuum goes normal.

Austin DeHaas has reacted to this post.

Fitech EFi Tuning Forum

FiTech EFI Tuning Forum

Just ran FiTech for first time