Serviceable Parts and Accessories
FiTech replacement parts and accessories
Austin DeHaas
FiTechefituning.com
These are replacement parts for the Throttle Body line of products from Fitech. I have also included a list of accessories that I use on my own installs. I know they work!!!! Links have been provided to make the process easier for you. Your support is greatly appreciated. As an Amazon Associate I earn from qualifying purchases. Thanks!!!!
Replacement Parts
Coolant Temp Sensor
AC Delco 213-928
Recommended replacement for supplied sensor. https://amzn.to/2IEZ7L8
O2 Sensor
Bosch 17014
Direct replacement for the supplied sensor. https://amzn.to/2XrXHYF
Fuel Pressure Regulator
Bosch 3 bar 0280160557
43psi regulator for the Go Street and Mean Street units. https://amzn.to/2GmeKo9
Bosch 4 bar 0280160575
58psi regulator for all units except Go Street and Mean Street. https://amzn.to/2VVb5Ec
FPR Delete Plug
Regulator delete plug for external regulators. This will allow you capability of looping the fuel
system through the unit. https://amzn.to/2IGwNYZ
MAP Sensor
Not serviceable. Part of the ECU on the throttle body units.
Injector
Fitech only $35 each
IAC Motor
AC Delco 19333273
Recommended replacement for supplies motor. https://amzn.to/2IvzBJ0
TPS
AC Delco 213895
Recommended replacement for supplied sensor. This one has the angled plug like original.
Accessories
Throttle Bushing
When attaching throttle, I recommend you use the large hole on the Fitech linkage. I advise you use a solid metal bushing as the rubber and plastic ones flex with the heavy return spring. Everybodies throttle rod or cable will be different, but here is an example. https://amzn.to/2VYzclH
Throttle Bracket
Bracket that I use. Not name brand, but just as good. https://amzn.to/2Vczecr
TV Cable
Cable that I use on 700r4 applications. This cable has a stop nut
adjustment. Set it and forget it. Factory automatic adjustment cable can slip,
causing misadjustment. https://amzn.to/2XqSnF6
700r4 Linkage Correction
Correction bracket for 700r4 TV cable attachment. https://amzn.to/2Xpkep1
Fuel Pump
Walbro 255lph In-tank pump
Good to 600 up. https://amzn.to/2XqqXiw
Aeromotive 340lph In-tank pump
The pump that I use. https://amzn.to/2XmdF6s
Aeromotive 340lph In-tank pump module
For retrofitting factory fuel tanks. https://amzn.to/2Dr89Z0
Fuel Pressure Gauge
Fitech manual gauge. https://amzn.to/2DkAgsE
SpeedHut electronic gauges. Check them out. All gauges can be customized for you.
Fuel Fittings & Hose
Earl's 350606 Pro-Lite 350 Nylon -6AN Hose - 6 Feet
My favorite braided fuel hose. https://amzn.to/2DoW1aR
Earl's AT165006ERL 3/8 tubing to -6AN adapter
Earl's AT165056ERL 5/16 tubing to -6AN adapter
Earl's AT809106ERL -6AN 90 degree fitting
Electric Fan Relay
40amp relay, with pigtail, for wiring electric fan. https://amzn.to/2DnxWB0
Small Cap HEI
The distributor I use for timing control on BBC and SBC. https://amzn.to/2Dl2y6w
Module Delete Harness 8861
Harness to convert distributor to timing control. https://amzn.to/2KPwiyA
HEI Lockout 88363
Mechanical advance lockout for traditional HEI distributors. https://amzn.to/2Xq3Pkc
Vacuum Advance Lockout 88364
Vacuum Advance Lockout for traditional HEI distributors. https://amzn.to/2DnpSAx
Ignition Box
6A Box
I use this box on all my builds. It lacks rev limiter, but the Fitech covers that.
Coils
Blaster
The coil I use for high performance builds. https://amzn.to/2XqtV6C
Street Fire
The coil I use for street builds. My daily driver runs this coil. https://amzn.to/2DmGWGT
Plug Wires
MSD 8.5 Super Conductors
I use these for performance builds. They are universal and require custom install.
Street Fire 8mm wires
Also universal. I use these on street builds. My daily driver runs these. https://amzn.to/2KQE0IJ
Will the Walboro pumps work with the PWM of the Fitech system? If not, what is done in the setup to over come that? I've been using Tanksinc.com for tanks and pumps and now have a 1992 Silverado that only needs a pump in the tank. Any help would be greatly appreciated
I know of guys that have used PWM on these pumps. Can't find any literature that says that it doesn't.
The funny part is, Tanksinc uses Walboro pumps. When ordering from Tanksinc and you mention using the FiTech there is a specific pump for the PWM. I've called Walboro and they say they don't have pumps for PWM. I just found it rather interesting. Thanks Austin for taking the time to put together this parts list. All the best,
What type/brand/model of Fuel filter do you guys using?
No one that would share their knowledge about what fuel filter they use??
Quote from Morten Larsen on May 5, 2019, 3:15 amNo one that would share their knowledge about what fuel filter they use??
Sorry, I had meant to answer you. Personally I run stock style filters. Not recommended but I have never had an issue.
My IROC was originally fuel injected, so I used the factory filter under the car. My 67 C10, I uses a metal canister generic filter with 3/8 hose barbs on each end.
Here's the filter I use. fram HPGC-1 flows up to 90 gph at 5 microns.
https://www.pegasusautoracing.com/productdetails.asp?RecID=91
Quote from Austin DeHaas on May 5, 2019, 8:04 amQuote from Morten Larsen on May 5, 2019, 3:15 amNo one that would share their knowledge about what fuel filter they use??
Sorry, I had meant to answer you. Personally I run stock style filters. Not recommended but I have never had an issue.
My IROC was originally fuel injected, so I used the factory filter under the car. My 67 C10, I uses a metal canister generic filter with 3/8 hose barbs on each end.
Hi Austin
That's what happens, but I'm grateful for all help you guys gives, we all must have time to other things to, but thanks for your information.
Would you say that a 10 micron filter after in-tank pump is okay, that's the only filter I'm using.
You might want to put a 30 micron before the 10.