FiTech EFI Tuning Forum

Please or Register to create posts and topics.

Sputter at WOT launch and at passing gear

Hoping to get some help with my first EFI experience. Have the fitech 30003 with the fuel command center. The issue I am having is when I am cruising along and ease throttle for passing gear it sputters and hesitates for about 1-2 seconds. Same thing happens when launching from a stop. I mash the throttle and it sputters before accelerating. I think it may be going too rich. After this happens a few times it will start to sputter and want to die when coming to a stop. During this time it seems AFR goes lean. If I fire it up and just go for a cruise it seems fine, it is when I drive it hard that the problems start. This car's main purpose for me is to be driven hard. IAC is fluctuating between 4-7 at warm idle. Please if I could get someone to look at my data log to save me from going to a efi tune shop. The first section of the log is when I go to hit passing gear. the second part shows WOT launch and regular driving. For some reason my data logs don't have header labels, but I labeled the ones I knew for sure, sorry. Here is the link:

https://docs.google.com/spreadsheets/d/1IFMl4FysT2u42qmzMjlzattJb3Ns0KjgwPQe_F1syBs/edit?usp=sharing

Here are some details about car.

289 SBF .060 over 9.0-9.5 compression ratio

AOD trans with constant pressure VB

4:11 gears

MSD Pro billet Dizzy with 6AL box

16deg initial all in @ 2500 37deg

Edelbrock performer RPM cam

Edelbrock EZ-street aluminum heads with upgraded springs and retainers