stalls after highway cruising - Easy Street 600 HP 30005
hey guys got a new fitech unit - dodge 440 built up engine - 470 HP , 727 transmission , 600 HP 30005- in tank fuel pump
she starts up great, idles great and runs great , the issue i cant figure out is that if i drive for extending period of time ( highway driving etc ) she stalls while coming to a stop in gear , if i shift to neutral she picks up but if i come to a stop in gear she stalls ? any pointers on where to start ?
Much appreciated
3 things to tune
Raise the DFCO decel fuel cut off enable temp to 300. Effectively disables that feature.
Raise the IAC loop rate down by 10
Raise the IAC loop rate up by 10
Fine tune as needed.
Quote from Austin DeHaas on July 9, 2023, 9:03 am3 things to tune
Raise the DFCO decel fuel cut off enable temp to 300. Effectively disables that feature.
Raise the IAC loop rate down by 10
Raise the IAC loop rate up by 10
Fine tune as needed.
alright will try that mate , thank you
i was also told to increase the idle rpm , currently idling at 850 rpm