timing control and ignition
Quote from coupejohnny33 on July 22, 2019, 10:20 amsbc with big hei dist with cdi Mallory 6la, 600 fitech. It didn't have a phase control rotor. Locked out distributor. Set the pointer 10 degrees and aligned # 1 wire. You are suggesting a newer style hei would work.
sbc with big hei dist with cdi Mallory 6la, 600 fitech. It didn't have a phase control rotor. Locked out distributor. Set the pointer 10 degrees and aligned # 1 wire. You are suggesting a newer style hei would work.
Quote from Deleted user on July 22, 2019, 10:41 amyes, the small cap HEI is a timing control distributor already. simply remove the module and add the MSD harness to the mag pickup. part number in the parts and accessories post. Phasing not required and set the timing by locking the Fitech timing control and sync with timing light.
Other products can work in theory, but I know this setup works. I use it on all my GM installs.
yes, the small cap HEI is a timing control distributor already. simply remove the module and add the MSD harness to the mag pickup. part number in the parts and accessories post. Phasing not required and set the timing by locking the Fitech timing control and sync with timing light.
Other products can work in theory, but I know this setup works. I use it on all my GM installs.