FiTech EFI Tuning Forum

Forum breadcrumbs - You are here:ForumPost History: CORTINA2800
Please or Register to create posts and topics.

Post History: CORTINA2800

I have done a few tweeks. I have increased the Idle Loop Rate Up to 50, DFCO Enable Temp up to 250F …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
Yes, the engine runs about 185F normally. The temp does rise to about that later on. I am using cam …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
Ok, I think I have managed it. I should have put my latest log on OneDrive. This should be the link. …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
I cannot use Dropbox for any of my logs as my good old Computer is still (successfully) running Vist …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
I have had a reply from FiTech about this problem. Here is their reply, "The log shows that …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
I have informed FiTech of this problem and sent them some logs. When (If) I get a reply I will post …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
DFCO is disabled and had no effect. Here are some Log charts. As you can see the hard accel and fair …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
Hello there. I have set up the tank with an in tank Walbro 255L/hr fuel pump and a return line. I do …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago
Hi, I am new to Fi-Tech. I have recently fitted the Go-Street 400hp system to my V6 Ford Cologne eng …In: Fi-Tech Go-Street 30003 400hp fitted to 2.8L Ford Cologne V6.
7 years ago