Forum Navigation
Post History: GT350
Yes, do let me know. My car is currently in winter storage but I’m picking it up Sunday.
I would li …In: AFR Learn maxing out negative
4 years ago
Hi Matt,
probably won’t make you feel any better, I never did figure that out either.
I changed …In: AFR Learn maxing out negative
4 years ago
Ok, I’ll try after work.
Honestly, I got frustrated and reloaded the software. I just set the IAC …In: Pig rich during low RPM high MAP
5 years ago
5 years ago
5 years ago
I've updated the software to 198i. Now I'm going very rich during low RPM (2-3000), High …In: Pig rich during low RPM high MAP
5 years ago
It was 70 over the weekend so I got a few miles on the new tune. Still locked in at -35 AFR learn % …In: AFR Learn maxing out negative
5 years ago
5 years ago
Honestly the car never gets much hotter than that. Add to that the fact that it's only 40 out. …In: AFR Learn maxing out negative
5 years ago
Ok,
I installed the T198i software. I can't believe how many more adjustments there are now! …In: AFR Learn maxing out negative
5 years ago
When you change the software version, that wipes all the settings clean, right? I'm hesitant, I …In: AFR Learn maxing out negative
5 years ago
Ok, I'll try it. Should I reset other things as well, perhaps a factory reset?
Because I …In: AFR Learn maxing out negative
5 years ago
So,
if I’m @ a -35 on the AFR learn does that mean all the values in my table are 35% too rich?.. …In: AFR Learn maxing out negative
5 years ago
I see...
I selected cam profile 2. I’m getting about 11-12 hg vacuum @ idle. It’s a SBF 289 .060 …In: AFR Learn maxing out negative
5 years ago
So...it looks like I’m hitting the targets (or close to it), the AFR trim % varies up and down to hi …In: AFR Learn maxing out negative
5 years ago
Hello,
I've read what you said about "maxing out negative on AFR learn". I believe …In: AFR Learn maxing out negative
5 years ago
5 years ago
5 years ago