Forum Navigation
Post History: Martens
Just to update you further in case you run across something weird in the future. Checked the remain …In: Engine Problem
7 years ago
Went for a test drive and readings on the handheld were noticeable smoother. What I really liked wa …In: Engine Problem
7 years ago
I learned that the FITECH does not heat the O2 sensor and it will show a fault for the first second …In: Engine Problem
7 years ago
That's on schedule for tomorrow. I'm gonna hook the timing light to each plug wire and ma …In: Engine Problem
7 years ago
I have the gauge on the FCC. It is showing steady state 58 at idle.
Car is acting as if its rich …In: Engine Problem
7 years ago
7 years ago
<iframe src="https://onedrive.live.com/embed?cid=F20EAC8C24077F1D&resid=F20EAC8C24077F1D …In: Engine Problem
7 years ago
I did a data log. I'll try to get a way to share it.
It immediately showed fault 105 at sta …In: Engine Problem
7 years ago
How do I data log? Which feeds would you recommend tracking?
Car started to day and idled fine. …In: Engine Problem
7 years ago
Need a little help. Went for a drive this evening to test out some sound deadening. Motor was warm …In: Engine Problem
7 years ago
Thanks for the help. I got to do a 20-60-20-60-20 run this weekend and no problems with it dying. …In: Dies under hard braking
7 years ago
Turning it back on and adjusting the sensitivity seems to have worked fine. I did lower the DFCO cu …In: Dies under hard braking
7 years ago
I'll try tuning the sensitivity. I got to do an 80-20 deceleration today and a 70-10 and the r …In: Dies under hard braking
7 years ago
I turned off the DFCO and got to drive it yesterday and today. I watched the MAP and was surprised …In: Dies under hard braking
7 years ago