Forum Navigation
Post History: b1ackth0rne
well, I do plan on creating a small how-to-guide eventually.. but most things would have to be cust …In: Injectors aren't firing, possible ECU failure
5 years ago
Well, it is done, i have successfully remote mounted the ECU. i had to do a lot of wiring and had to …In: Injectors aren't firing, possible ECU failure
5 years ago
that's a good tip, i will try and ask for the new harness!
as I said - the second ECU isn� …In: Injectors aren't firing, possible ECU failure
5 years ago
As of now I’m waiting for the 3rd ECU. Not shipped yet.
but After taking apart the 2nd …In: Injectors aren't firing, possible ECU failure
5 years ago
most techs won't know the answer too, i guess.
i guess they omitted the regulator there for es …In: Injectors aren't firing, possible ECU failure
5 years ago
what do plan to ask fitech exactly? let me know the answer as well.
the silicone i believe is more …In: Injectors aren't firing, possible ECU failure
5 years ago
My plan is to use a small vacuum hose and T it into the manifold pressure (as boost controllers usua …In: Injectors aren't firing, possible ECU failure
5 years ago
well, as it happens the epoxy is just an upper layer, whereas most of the board is covered by the gr …In: Injectors aren't firing, possible ECU failure
5 years ago
Well, i had some luck taking the ECU apart. i don't know much about IC circuits and all but man …In: Injectors aren't firing, possible ECU failure
5 years ago
I've heard that the Holley sniper has more of the same issues, but since they sponsor so many y …In: Injectors aren't firing, possible ECU failure
5 years ago
I tried it all, got to a point where the unit is connected to a battery, with and without all the co …In: Injectors aren't firing, possible ECU failure
5 years ago
I have no significant power draw, when the is in the "on" position, voltages are good 12.5 …In: Injectors aren't firing, possible ECU failure
5 years ago
replying on all of your comments and seggustions:
I disconnected the handheld from the ECU side …In: Injectors aren't firing, possible ECU failure
5 years ago
UPDATE:
the new ECU arrived, it has some differences comparing it to the old one (images attached …In: Injectors aren't firing, possible ECU failure
5 years ago
my hood clearance is quite low unfortunately... i did use this actually which seems similar, and it …In: Injectors aren't firing, possible ECU failure
5 years ago
this gives me hope since mine is on its way as well. since i live in Israel they walked me through a …In: Could I have a bad fuel pressure regulator?
5 years ago
Quote from SodaPop on July 14, 2021, 7:08 pm
Electronics dont like heat and it greatly shortens it& …In: Injectors aren't firing, possible ECU failure
5 years ago
no worries about the English - 1- yours is good. 2- I'm from Israel so it's not my native …In: Injectors aren't firing, possible ECU failure
5 years ago
Hi, as I talked with fitech tech support - and did all of the things mentioned above, they offered m …In: Injectors aren't firing, possible ECU failure
5 years ago
Pete - you can backup your current settings - just load the default ones and reconfigure them to you …In: fuel pump does not stop priming
5 years ago
Quote from redriderjf87 on June 3, 2021, 5:26 pm
Not that I'm recommending to change this righ …In: Lean under minimal throttle
5 years ago
The battery did feel a bit low, but even when connecting a battery booster and running car with weld …In: Injectors aren't firing, possible ECU failure
5 years ago