Forum Navigation
Post History: mlrtyme
Well, we gave the FiTech a valiant effort, that's for sure. I put the freshly rebuilt TB back o …In: FiTech no longer runs - Need help!!!!
4 years ago
I stand corrected. In their documentation, they say spark and fuel. How interesting. However, I woul …In: Rev Limit RPM function does nothing
4 years ago
I actually just installed my replacement ECU. My issues were different, but I found a questionable i …In: Bad map sensor
4 years ago
Update: I called the support line directly and spoke with a rep. I explained this was my primary tra …In: FiTech no longer runs - Need help!!!!
4 years ago
Rev limiters are exclusively a spark thing...not fuel. If you cut the fuel to 'limit' the …In: Rev Limit RPM function does nothing
4 years ago
Okay, spoke to Alex in support. We walked through steps to see if resetting the system to factory wo …In: FiTech no longer runs - Need help!!!!
4 years ago
I have contacted FiTech support, and they have asked me on 3 occasions to update the handheld. They …In: FiTech no longer runs - Need help!!!!
4 years ago
Yes. 14ga connected from throttle body to the ground on the radiator core. (The radiator core ground …In: FiTech no longer runs - Need help!!!!
4 years ago
Hello all,
First I want to say thanks to everyone who has helped me in my journey with the FiTech …In: FiTech no longer runs - Need help!!!!
4 years ago
Update (Positive): I did a reset of the IAC steps per the suggestions outlined above. I also went in …In: New to FiTech - Failed Emissions...BADLY
4 years ago
Having trouble dialing in the IAC. When I start the engine and bring it up to temp, I can set to 4-7 …In: New to FiTech - Failed Emissions...BADLY
4 years ago
Hey Jripp58,
AFR setting at idle says it is right at 13.6. In AZ, they do a dyno-based test where …In: New to FiTech - Failed Emissions...BADLY
4 years ago
Thank you for this. I found a very helpful youtube video from a bronco guy in Nashville about the Fi …In: Latest IAC adjustment instructions from FiTech turning both front and rear blades
4 years ago
Sorry, I should follow this up with the info that I followed the suggestions regarding shielding the …In: New to FiTech - Failed Emissions...BADLY
4 years ago