FiTech EFI Tuning Forum

Forum breadcrumbs - You are here:ForumPost History: leuggy
Please or Register to create posts and topics.

Post History: leuggy

just an update reloaded software as per Bryce from fitech and has fixed my problem with the AFR the …In: question about AFR
7 years ago
thanks for the reply will check MAP sensor the next time it happens   Thanks BlaineIn: question about AFR
7 years ago
Hello have been having some trouble with the AFR freezing at 10.4 and the AFR trim % stays at 0.0 …In: question about AFR
7 years ago
I have had to reset the ecu and do a initial set up again and have adjusted throttle screw and got t …In: will not run after initial setup
7 years ago
hi well I got the new pump for the G-Surge tank and got everything setup and got the truck runnin …In: will not run after initial setup
7 years ago
just to let you guys know I have found the problem, the discharge plastic fitting on the high pressu …In: will not run after initial setup
7 years ago
Quote from Austin DeHaas on May 10, 2019, 4:48 pm Quote from leuggy on May 10, 2019, 12:36 pm ye …In: will not run after initial setup
7 years ago
yes I could see it full when I had the return line off, I had primed the G-surge tank full before I …In: will not run after initial setup
7 years ago
Quote from bdhulderman on May 9, 2019, 10:01 pm 1) Couple of things.  Make sure you have the fitech …In: will not run after initial setup
7 years ago
1. the handheld does not go black, there is dashboard data, crank rpm when cranking is around 200 rp …In: will not run after initial setup
7 years ago
Hi Having problems with a 30005 fitech. After initial setup I tried to start and the truck would …In: will not run after initial setup
7 years ago