Forum Navigation
Post History: ray
Fitech informed me I should not need a relay for the fcc. This was after I melted the orange wire go …In: Orange wire fuel pump
8 years ago
Mine went black screen. I have two controllers and both were black screen but the car ran no differ …In: hand held controler not working
8 years ago
Many have had no problems me no so much.
1. injector
2. burned wiring at the 4 pin connecter.
…In: 3003 flooded engine.
8 years ago
Update 2. inj. showed up one day early but before replacing it I gave the presser in the tank thing …In: 3003 flooded engine.
8 years ago
I pulled my fcc apart because I was running out of fuel at high rpms.
Moved the pump and filter u …In: Successful?
8 years ago
When it works its a lot of fun to drive but not so much when it goes to the dark side.
Random inf …In: 3003 flooded engine.
8 years ago
Maybe? If you have the old stile smaller 6 wire plug it may have burned some wires going to the pump …In: No fuel pressure when engine hot
8 years ago
Update. 1. The car was stupid fast for apx. 3 miles than the injector hung up again.
loss of fue …In: 3003 flooded engine.
8 years ago
My TPS hung below the base of the throttle body and would bind when you bolted it down.
had to cu …In: TPS sticking
8 years ago
Got the gauge installed. Now I know a can of cleaner will push 80 psi.
After running almost the …In: 3003 flooded engine.
8 years ago
Got the testing tool today..What I don't like is it doesn't have a PSI gauge but it will b …In: 3003 flooded engine.
8 years ago
Got my new IAT today from fitech(actually its used) It is brass and not plastic like the old one and …In: 3003 flooded engine.
8 years ago