Forum Navigation
Post History: Alfa302
GM shows 47 as an "air condition clutch and cruise circuit" and "Turbo/Super Charger …In: Fault codes
7 years ago
Did have a look first but as you say they were not list, since then I have taken the earth wires fro …In: Fault codes
7 years ago
Anyone have an idea as to what the P0080 code is, not been able to find anything about itIn: Fault codes
7 years ago
Hi guys
Need some advice on fault codes I have a 1200pa running my fuel and Fan 1 only, it was ru …In: Fault codes
7 years ago
Other than Prime fuel and the temps what other settings can have an impact on cold starts that I cou …In: Cold start
7 years ago
Hi all
Need help with cold starts on my 1200pa.
Had this issue last year and Austin was good e …In: Cold start
7 years ago
7 years ago
Sorry for the late reply been busy at work for the last few weeks....
So I went with an external …In: Need advise please
8 years ago
Emailed Fitech and this is their reply......Hi
you can get a replacement regulator Office 97 VW gol …In: Need advise please
8 years ago
Who knows, it does seem strange though that both are 43psi. I just want to get it running right so I …In: Need advise please
8 years ago
Austin,
Yes orange wire is direct and no relay, blocked the return and pressure went over the 100 …In: Need advise please
8 years ago
No, on prime it's 43
I'm thinking of swapping the lines around to see what effect that …In: Need advise please
8 years ago
8 years ago
Bdhulderman
I see what your saying, but part of the attraction to the Fitech for me was how the u …In: Need advise please
8 years ago
Austin,
Do I need to restrict the return pipe, is the -8 to much?
Would -4 be better, I would …In: Need advise please
8 years ago
Yep, mine went way over 100 without the return.
The return pipe is 1 ft of -6 from the Fitech and …In: Need advise please
8 years ago
I checked the PWM and that's at 74, put it to 84 and no changed, removed one filter still 74, w …In: Need advise please
8 years ago
Ok, cam is now on 3 and fuel pressure is at 53, took out one of my filters but it was still 53
We …In: Need advise please
8 years ago
Very happy with the progress so far, figured it would take a couple of months before it settles and …In: Need advise please
8 years ago
Went for another drive and logged it, this was at 60+mph.
Will reset cam to 3 and drive later thi …In: Need advise please
8 years ago
Nice idea with the fuel rail caps.
Took it for a 20 mile run and spent most of the time at at 300 …In: Need advise please
8 years ago
Not sure about fuel pressure yet, the gauge I ordered looked like a chinese knock off so I sent it b …In: Need advise please
8 years ago
I have some time on Sunday so will clock up some miles.
Here is the log when at 15 IAC.
Made a …In: Need advise please
8 years ago
8 years ago
Sorry there like this, asked my son to help out and this is what I get back, I did three 30 second l …In: Need advise please
8 years ago
Austin,
Thank you for your assistance.
Cam was set on 3 now but I now have it on 4 as I read a …In: Need advise please
8 years ago
I have a 1200pa on a SBF 347 with Victor jr intake, AFR renegade 195cc heads, Comp cams XR286R 050 …In: Need advise please
8 years ago
Austin, that is where I'm going wrong as I'm still taking fuel out from the 65 and 170 (-3 …In: Flooding cold start
8 years ago
