Forum Navigation
Post History: ray230
No I have not had any issue with that. I did have an injector stick open once, and had to replace th …In: MSD Ready to Run
4 years ago
Yes. Then I shielded it also. Make sure you clear everything and start your setup over again as I me …In: MSD Ready to Run
4 years ago
I wasn't using the vacuum advance with the carb. So I don't know, but it would have probab …In: Vacuum advance idle transition
5 years ago
Hugger, thanks for the reply. No SBC. I've got a stroked B block Mopar. I'll read the arti …In: Vacuum advance idle transition
5 years ago
I've got everything running well. Got the vacuum advance working and it helped the temperature …In: Vacuum advance idle transition
5 years ago
Is the MAP changing or is it static too. Sounds similar to the issue I had. Turned out to be a bad M …In: question about AFR
5 years ago
I've put about 150 miles and everything seems to be running well. Starts good cold and hot. Run …In: High idle - high IAC steps
5 years ago
Heat cycled a couple more times tonight then took a couple of drives. first one about 5 miles, then …In: High idle - high IAC steps
5 years ago
Got it back from Fitech Friday. Reinstalled and started and ran for a couple of heat cycles today. A …In: High idle - high IAC steps
5 years ago
Got the word today. Bad MAP sensor and replaced ECU. On its way back to me. Hopefully I will have it …In: High idle - high IAC steps
5 years ago
Got a reply today from Fitech. They said to send back. "There is an issue in software or ECU ha …In: High idle - high IAC steps
5 years ago
Still waiting on a reply from Fitech.
Reading other posts I see some questions on Walbro pumps no …In: High idle - high IAC steps
5 years ago
5 years ago
Return Merchandise Authorization. They suggested sending the unit back and they would test for a war …In: High idle - high IAC steps
5 years ago
You didn’t see anything in the videos either?
I think I am going to send a couple of log files to …In: High idle - high IAC steps
5 years ago
Links to today, log and videos. Prime shot. Starting. Running at temp (and log). Shut off. I didn� …In: High idle - high IAC steps
5 years ago
5 years ago
I just checked and I was wrong on the black wire. I do not have the Fitech black wire connected to a …In: High idle - high IAC steps
5 years ago
https://www.dropbox.com/s/khjecc0ycui3e6k/DashBoard10.csv?dl=0
Here is a link to today's log …In: High idle - high IAC steps
5 years ago
Any idea why the spark adv is so different in the 2 logs? Does it even mean anything since I am not …In: High idle - high IAC steps
5 years ago
I want to be sure I understand how to reset learn. Is that afr learn? What are the steps? Thank you.In: High idle - high IAC steps
5 years ago
I have the cam setting on 3.
Basics on the engine. Mopar 400 block with a 500 ci stroker bottom …In: High idle - high IAC steps
5 years ago
https://www.dropbox.com/s/sanndj7t260vazj/DashBoard8.csv?dl=0
https://www.dropbox.com/s/w6znqx6fn …In: High idle - high IAC steps
5 years ago
Austin, I found your email and added you to my Dropbox. Let me know if you can see the files.In: High idle - high IAC steps
5 years ago
I tried to post this once but it didn't go through? I'm on my 3rd issue getting this unit …In: High idle - high IAC steps
5 years ago
For sure. It’s going to take a while for me to trust it. Any advice on how to test besides just runn …In: Tach Signal missing
5 years ago
Update:
I received the RMA form today, but before I disassembled and sent back I wanted to try one …In: Tach Signal missing
5 years ago
2 year old Optima red top. Showing fully charged. If it were drawing down on crank, it would show be …In: Tach Signal missing
5 years ago
but I wouldn’t have had the issue when I connected the white wire to the battery correct?
What el …In: Tach Signal missing
5 years ago
Update: Added battery to chassis ground. So now I have battery grounded 4 ways. Engine, chassis, bod …In: Tach Signal missing
5 years ago
I’ve got all the grounds but battery to chassis. I’ll try that too. Cranking volts bounced in 10s an …In: Tach Signal missing
5 years ago
Key on pump runs and comes to pressure. Injectors fire the starting shot of fuel. Car cranks and fir …In: Tach Signal missing
5 years ago
If you check my posts I have a similar issue where the car died idling and no restart. How would it …In: Tach Signal missing
5 years ago
Quote from Austin DeHaas on November 27, 2018, 8:49 am
Quote from mark_j@windowslive.com on Novem …In: Tach Signal missing
5 years ago
For those that have an MSD Ready to Run distributor - the instructions in the manual for Ready to Ru …In: MSD Ready to Run
5 years ago